Heavy Equipment Operator Training in Saudi Arabia – Forklift, Scissor Lift & Manlift Certification
Untrained Operators Cause 95% of Forklift Accidents – Get Your Team TVTC-Certified
TVTC-approved Heavy Equipment Operator training in Jubail, Riyadh, Jeddah, Dammam. Forklift, Scissor Lift, and Manlift operator certification with hands-on practical training.
TVTC-Approved Center
Hands-On Practical Training
Duration of Forklift: 1 day
Duration of Scissor Lift: 1 day
Duration of Manlift/Boom Lift: 1 day
Certification: TVTC Approved Certificate
Get TVTC-Certified Heavy Equipment Operators – Prevent Accidents & Fatalities
Forklift Operator Training & Certification
Perfect for: Warehouse workers, logistics operators, factory workers, anyone who will drive forklifts
What You’ll Learn:
Theory (Classroom)
Forklift Components & Controls:
- Types of forklifts (counterbalance, reach, pallet jack, order picker)
- Forklift capacity ratings and data plates
- Controls (steering, accelerator, brake, mast, forks)
- Attachments (clamps, rotators, side shifters)
- Fuel types (electric battery, LPG, diesel)
Stability Triangle & Center of Gravity:
- Why forklifts tip over (THIS IS THE MOST CRITICAL CONCEPT)
- Stability triangle principle
- How load position affects stability
- Combined center of gravity (forklift + load)
- Forward tip-over vs. sideways tip-over
Load Handling:
- Calculating load capacity based on load center
- Reading load capacity charts
- Adjusting forks to load width
- Tilting mast for load security
- Stacking and tiering
- Free lift vs. full lift
Pre-Operation Inspection:
- Daily checklist (tires, brakes, steering, mast, forks, lights, horn, seatbelt)
- Reporting defects and tagging out unsafe equipment
- Fluid levels and battery checks
Safe Operating Procedures:
- Seatbelt MUST be worn (saves lives in tip-over)
- Speed limits and turning
- Driving loaded (forks low, mast tilted back)
- Driving unloaded (forks low, traveling backward if no visibility)
- Ramps and inclines (loaded uphill, unloaded downhill)
- Loading/unloading trucks (dock plates, trailer jacks)
- Pedestrian awareness and spotters
- Parking safely (forks lowered, mast forward, parking brake, key removed)
Refueling and Battery Charging:
- LPG cylinder change procedures (ventilated area, no ignition sources)
- Battery charging safety (ventilation, no sparks, PPE)
- Spill procedures
Assessment: Written exam (multiple choice, 80% passing score)
Practical Training (Hands-On)
Supervised Forklift Operation:
- Pre-operation inspection practice
- Starting, moving, stopping, steering
- Lifting and lowering loads
- Stacking pallets at various heights
- Traveling loaded and unloaded
- Backing up and turning
- Maneuvering in tight spaces (warehouse aisles)
- Loading and unloading simulated truck
- Parking safely
Practical Assessment:
- Demonstrate pre-operation inspection
- Complete obstacle course with load
- Stack pallets at required heights
- Load/unload safely
- Pass/Fail evaluation by certified instructor
Certification: TVTC Forklift Operator
Duration: 1 day
Validity: 2 Years (refreshers every 1 year recommended)
Includes: Training manual, practical training on actual forklift, written & practical assessment, TVTC Certificate
Scissor Lift Operator Training
Perfect for: Maintenance workers, electricians, facility staff, anyone working at height on scissor lifts
What You’ll Learn:
Theory Components:
- Types of scissor lifts (electric, diesel, rough terrain, narrow aisle)
- Load capacity and platform ratings (people + tools + materials)
- Pre-operation inspection checklist
- Controls and operation
- Setup and leveling (must be on level ground)
- Fall protection requirements (when harness required)
- Guardrail requirements on platform
- Traveling with platform elevated (generally NOT allowed, exceptions)
- Weather restrictions (wind speed limits)
- Overhead hazards (power lines, structures)
- Ground hazards (holes, slopes, soft ground)
- Emergency lowering procedures
Practical Training:
- Pre-operation inspection practice
- Operating controls from ground and platform
- Elevating platform
- Moving scissor lift (ground-level travel only for most models)
- Working from platform safely
- Emergency lowering drill
- Parking and securing
Practical Assessment: Demonstrate inspection, setup, operation, emergency procedures
Certification: TVTC Scissor Lift Operator Certificate
Duration: 1 day
Validity: 2 Years (refreshers every 1 year recommended)
Manlift / Boom Lift Operator Training
Perfect for: Maintenance technicians, telecom workers, construction workers, anyone operating aerial work platforms
What You’ll Learn:
Theory Components:
- Types of aerial work platforms (articulating boom, telescopic boom, vertical mast)
- Reach and height capabilities
- Load capacity calculations (people + tools at extended reach)
- Pre-operation inspection
- Outrigger setup and leveling (CRITICAL for stability)
- Controls (boom extension, boom articulation, platform rotation, drive)
- Fall protection requirements (harness ALWAYS required)
- Overhead hazards (power lines = #1 killer)
- Minimum approach distances to power lines by voltage
- Wind speed restrictions
- Setup on slopes (generally not allowed)
- Emergency descent systems
Practical Training:
- Pre-operation inspection
- Outrigger deployment and leveling
- Operating boom controls from platform
- Extending and retracting boom
- Articulating boom around obstacles
- Platform positioning
- Emergency descent procedures
Practical Assessment: Demonstrate inspection, setup, boom operation, emergency procedures
Certification: TVTC Manlift/Boom Lift Operator Certificate
Duration: 1 day
Validity: 2 Years (refreshers every 1 year recommended)
BUNDLE OPTION: Multi-Equipment Operator Training
Train Your Operators on All Three Equipment Types
Perfect for maintenance departments, facilities teams, multi-purpose warehouses
Duration: 1-3 days
Certification: 3 TVTC Operator Certificates
Why PITC KSA?
TVTC-Approved & 9+ Accreditation
TVTC, Saudi Heart Association, NASP, IASP, Highfield, aosh, HSI, IQ-OHS, IBSP
Your certifications are recognized by employers and government agencies throughout Saudi Arabia.
Flexible Training Delivery Across Saudi Arabia
Choose on-site training at your facility in Dammam, Riyadh, or Jeddah – or attend our Jubail classroom. We also offer online courses for remote teams, with the same rigorous standards and valid certifications.
Affordable Pricing with Group Discounts for Corporate Clients
High-quality training shouldn’t break your budget. PITCKSA offers competitive rates and volume discounts for companies training multiple employees. Request a custom quote for your organization.
Bilingual Training (Arabic-English) for Maximum Understanding
Safety training only works when every employee comprehends the material. Our certified instructors deliver courses in both Arabic and English, ensuring complete understanding across your diverse workforce.
Industry-Specific Expertise in Oil & Gas, Food Safety, and Construction
Generic training doesn’t address your sector’s unique hazards. Our instructors have real-world experience in petrochemicals, SFDA compliance, and construction safety, delivering practical skills you can apply immediately.
Proven Track Record: 1350+ Certified, 940+ Placed in Saudi Companies
Our graduates work at leading companies across KSA. From Saudi Aramco contractors to food processing facilities, PITCKSA-trained professionals are securing positions and advancing their careers.
Who Needs This
Workers: ✅ Warehouse operators, logistics workers, inventory staff, maintenance technicians, electricians, facilities staff
Companies: ✅ Warehouses, distribution centers, logistics companies, manufacturing plants, construction sites, facilities management, airports
Saudi Law: Operators must be trained and licensed. Unlicensed operators = employer liability for accidents.
What's Included
✅ Training manual (Arabic/English)
✅ Operator safety handbook
✅ Minimum 8 hours hands-on equipment operation (forklift)
✅ Pre-operation inspection checklist
✅ Written exam + practical assessment
✅ TVTC operator certificate
✅ Wallet card for jobsite verification
✅ Lifetime validity (forklift) or 3 years (lifts)
Training Options
Classroom + Practical (Jubail, Riyadh, Jeddah)
- Public batches at our training yard (actual equipment)
- Forklift training uses real warehouse environment
On-Site Corporate
- We bring equipment to your warehouse, construction site, or facility
- Train entire fleet of operators
- Minimize downtime (we work around your schedule)
Q: Is forklift license mandatory?
A: Yes. Saudi labor law requires trained, licensed operators.
Q: Does license expire?
A: Forklift license: lifetime (but employers often require 3-year refresher). Aerial lifts: 3 years.
Q: What if someone fails?
A: Free retake within 30 days. Pass rate is 95%+.
Q: Do you provide equipment?
A: For classroom/public batches, yes. For on-site, we can bring equipment or use yours.
other popular courses
