OSHA SAFETY TRAINING · SAUDI ARABIA
OSHA Training in Saudi Arabia — 10-Hour and 30-Hour Certification for KSA Professionals
We’ve been running OSHA Outreach Training in Saudi Arabia since before most of our competitors knew what it was. The 10-Hour and 30-Hour programs run at our centres in Riyadh, Jeddah, Dammam, and Jubail — or on-site at your facility. If Saudi Aramco, SABIC, or NEOM contractors are asking your team for OSHA cards, this is where you get them.
TVTC-Approved Training Centre
OSHA 10-Hour & 30-Hour Programs
Available Onsite, Online & Blended
Duration10 Hours (OSHA 10) · 30 Hours (OSHA 30)
CertificationOSHA Outreach Program Card
LanguageArabic & English
DeliveryRiyadh · Jeddah · Dammam · Jubail · Nationwide
CertificationOSHA Outreach Program Card
LanguageArabic & English
DeliveryRiyadh · Jeddah · Dammam · Jubail · Nationwide
Certified Graduates
Saudi Companies Served
Years of Experience
Approved Centre
UNDERSTANDING OSHA TRAINING
What Is OSHA Training and Why Does It Matter in Saudi Arabia?
OSHA — the Occupational Safety and Health Administration — is the US federal body that sets and enforces workplace safety standards. That’s where it started. Over the past two decades, OSHA Outreach certification has become the default safety credential for multinational projects across the Gulf, including Saudi Arabia’s oil and gas, construction, and manufacturing sectors.
The training comes in two levels. The OSHA 10-Hour Course is for site workers and new entrants — hazards, rights, and what to do when something goes wrong. The OSHA 30-Hour Course is for the people in charge: HSE officers, supervisors, and managers who run safety programs and answer for what happens on site.
In Saudi Arabia, OSHA certification is required by:
- Saudi Aramco, SABIC, and NEOM contractor prequalification
- EPC firms requiring international safety compliance documentation
- International joint ventures applying US safety standards
- Companies pursuing ISO 45001 certification
- Vision 2030 Giga Project HSE management teams
From our experience: We regularly see OSHA cards listed as a prequalification requirement in the HSE documentation of Saudi Aramco-tier contractors and NEOM sub-contractors. If your team doesn’t have them, the client will tell you.
OSHA IN KSA
Why OSHA Certification Is Required for Saudi Arabia’s Industrial Workforce
Saudi Arabia is building at a pace that requires every site to run clean. The Giga Projects, the oil facilities, the new industrial cities — they all share one thing: employers won’t put workers in safety-critical roles without proof of internationally recognised training. OSHA certification is that proof.
International Employer Recognition
Walk into the prequalification process for any major EPC project in the Kingdom and OSHA comes up fast. International contractors specify it for supervisory and site safety roles the same way they specify PPE — not optional, just baseline.
NEOM & Vision 2030 Compliance
NEOM, Qiddiya, Red Sea Project — every Vision 2030 Giga Project runs a tight HSE prequalification process. OSHA is on that list. Teams without it get filtered out early.
Oil & Gas Sector Standard
Saudi Aramco, SABIC, and their tier-1 contractors have been specifying OSHA for supervisors, HSE officers, and permit-to-work coordinators for years. If you work on their facilities, it’s a hard requirement.
Career Advancement for Safety Professionals
OSHA cards don’t expire and they work everywhere — not just in Saudi Arabia. Safety professionals who pair OSHA with IOSH Managing Safely or NEBOSH IGC tend to have the most portable credentials in the GCC.
COURSE BENEFITS
What OSHA Training Actually Gets You in Saudi Arabia
OSHA Outreach Certification Card
You leave with an OSHA Outreach Program card — no expiry, no renewal required, accepted by Saudi Aramco contractors, EPC firms, and project owners across the GCC and beyond.
Hazard Recognition & Control
Falls, struck-by, electrocution, caught-in/between. These four hazards account for most construction deaths in Saudi Arabia and worldwide. The training is built around recognising them, understanding why they happen, and knowing how to stop them.
Regulatory Fluency
OSHA’s recordkeeping and enforcement standards translate directly to what KSA site auditors look for. If you’re also working toward ISO 45001 or managing MOMRA compliance, the OSHA framework lines up well.
Practical Risk Assessment Tools
Job Hazard Analysis, incident investigation, emergency response planning — the tools covered in the course are the same ones you’d use on a Saudi Aramco site or a KSA manufacturing floor. That’s intentional.
Supervisory Safety Competence
The 30-hour course is built for the people responsible when something goes wrong. HSE managers, site supervisors, safety officers — the program focuses on the decisions they actually have to make.
Measurable Incident Reduction
When your supervisors understand OSHA standards, LTI rates go down. That matters for Saudi Aramco HSE audits, ISO 45001 performance reviews, and insurance assessments. Not a soft benefit — a measurable one.
THE PITC ADVANTAGE
Why Saudi Safety Professionals Train with PITC KSA
TVTC-Accredited Centre
TVTC accreditation means your training meets Saudi Arabia’s national vocational standards — not just in theory, but in the documentation that auditors and clients actually check.
9 Years in Saudi Industry
We’ve been in this since 2015. 1,350 graduates, 940 Saudi clients, across sectors from oil and gas to healthcare. Most of the growth has been word-of-mouth.
Bilingual Arabic & English
Every course runs in Arabic and English. Saudi nationals and expat workers train together without anyone having to guess what the instructor meant.
Nationwide Training Coverage
Centres in Jubail, Riyadh, Jeddah, and Dammam. If those don’t work, we come to you.
Authorised OSHA Instructors
Our instructors are authorised OSHA Outreach Trainers who’ve worked on Saudi industrial sites. They know the local context — not just the American standard they’re teaching from.
Corporate & Government Accounts
Need 20 people trained before a project kicks off? We handle group bookings, custom scheduling, and compliance documentation for corporate clients across the Kingdom.
FIND YOUR COURSE
OSHA 10-Hour vs OSHA 30-Hour: Which One Do You Actually Need?
The short answer: your role determines the level. Our OSHA 10 vs 30-hour comparison guide goes through it in detail if you’re still deciding.
OSHA 10-Hour Course
Entry-level workers and anyone new to a site. If someone hasn’t done formal safety training before, this is the right starting point. The course covers hazard awareness, worker rights, fall protection, electrical safety, and PPE — everything needed to work safely in a KSA construction or industrial environment.
OSHA 30-Hour Course
Anyone with safety management responsibilities. If you run a safety program, sign off permits, or answer for HSE performance on a Saudi site, the 30-hour is the one. It covers safety management systems, OSHA standards, and the kind of incident investigation that holds up in an audit.
OSHA COURSES — PITC KSA
OSHA Courses Available Through PITC KSA
Construction or general industry, 10-hour or 30-hour — all programs run at our centres or on-site at your facility. For pricing, see our safety training cost guide.
10Hour
Construction
Safety Course
Construction
Safety Course
OSHA 10-Hour Construction Safety Course
10 Hours · 2 Days OSHA Outreach Card No Expiry
Perfect for: Entry-level construction workers, frontline site operators, new hires entering Saudi construction environments.
What You Will Learn
- Introduction to OSHA and worker rights
- Fall protection and prevention systems
- Electrical hazard awareness
- Struck-by, caught-in/between, and vehicle hazards
- PPE selection and use
- Scaffolding and portable ladder safety
- Emergency action and fire prevention plans
Assessment
Knowledge checks and a final written assessment. Focused on practical hazard recognition.
Certification & Duration
OSHA Outreach Card — Construction (10 Hour). No expiry. Delivered over 2 days at PITC KSA centres or on-site across Saudi Arabia.
30Hour
Construction
Safety Course
Construction
Safety Course
OSHA 30-Hour Construction Safety Course
30 Hours · 4-5 Days OSHA 30-Hour Card Supervisor Level
Perfect for: Site supervisors, HSE officers, construction managers, and EPC project leads.
What You Will Learn
- Advanced construction hazard identification
- OSHA 1926 standards in depth
- Safety management system development
- Fall protection and competent person requirements
- Scaffolding, aerial work platforms, and excavation safety
- Incident investigation and root cause analysis
- OSHA recordkeeping and reporting
Assessment
Practical scenario exercises and a written final examination testing OSHA standards knowledge and real-world Saudi construction application.
Certification & Duration
OSHA Outreach Card — Construction (30 Hour). No expiry. Delivered over 4-5 days at PITC KSA centres or on-site across Saudi Arabia.
OSHA 10-Hour General Industry Safety Course
10 Hours · 2 Days OSHA Outreach Card No Expiry
Perfect for: Manufacturing workers, plant operators, warehouse and facility maintenance staff.
What You Will Learn
- General industry hazards (OSHA 1910)
- Machine guarding fundamentals
- Electrical safety and lockout/tagout (LOTO)
- Hazard communication (HazCom/GHS)
- Walking-working surfaces and fall hazards
- Fire safety and emergency action plans
- PPE for general industry
Assessment
Module knowledge checks and a final written assessment on OSHA 1910 general industry standards.
Certification & Duration
OSHA Outreach Card — General Industry (10 Hour). No expiry. Delivered over 2 days at PITC KSA centres or on-site across KSA.
30Hour
General
Industry Course
General
Industry Course
OSHA 30-Hour General Industry Safety Course
30 Hours · 4-5 Days OSHA 30-Hour Card Manager Level
Perfect for: HSE managers, safety officers, plant supervisors, and industrial safety professionals.
What You Will Learn
- OSHA 1910 general industry standards in depth
- Safety management programs and systems
- Advanced hazard communication (HazCom/GHS)
- Process safety management (PSM) overview
- Emergency response planning
- OSHA recordkeeping and reporting
- Machine guarding and LOTO program development
- Respiratory protection program management
Assessment
Scenario-based exercises and written examination testing OSHA 1910 standards knowledge and safety program management.
Certification & Duration
OSHA Outreach Card — General Industry (30 Hour). No expiry. Delivered over 4-5 days at PITC KSA centres or on-site across Saudi Arabia.
TVTC Accredited
Full TVTC accreditation means our OSHA programs count toward Saudi workforce development requirements and Nitaqat compliance. The training doesn’t just look right on paper — it meets the actual national standard.
About PITC KSA
PITC KSA has been operating in Saudi Arabia since 2015. Facilities in Jubail, Riyadh, Jeddah, and Dammam. We’ve trained 1,350 professionals and worked with 940 Saudi companies across the Kingdom.
Why We Lead OSHA Training in KSA
We’re an authorised OSHA Outreach Training provider with nine years of experience fitting international standards to the realities of Saudi Arabia’s industrial and construction environment.
FREQUENTLY ASKED QUESTIONS
Common Questions About OSHA Training in Saudi Arabia
Is OSHA recognised in Saudi Arabia?
Yes — and increasingly so. OSHA started as a US regulatory framework, but the Outreach certification has become standard across the Gulf. Saudi Aramco contractors, SABIC, NEOM project teams, and most large EPC firms operating in the Kingdom require it. It’s not a nice-to-have anymore.
What is the difference between OSHA 10-hour and OSHA 30-hour?
Hours of training, mostly — but also scope. The 10-hour is for site workers: hazard awareness, rights, and what to do when something looks wrong. The 30-hour goes deeper into safety management systems, OSHA standards, and incident investigation. If you manage a team or run a safety program, you want the 30-hour. Our comparison guide has the full breakdown.
Who should take the OSHA 30-hour in Saudi Arabia?
Anyone responsible for safety on a Saudi site. HSE officers, site supervisors, project managers, PTW coordinators. If your job involves telling other people what to do about safety — or signing off on work permits — the 30-hour is the right level.
How long is OSHA certification valid?
The card itself doesn’t expire. That said, many Saudi employers and project owners now ask for refresher training every three to five years — partly for compliance, partly because standards change. We’d recommend it regardless.
Can I complete OSHA training online in Saudi Arabia?
Yes. We run blended programs that combine online modules with face-to-face practical sessions. It works well for corporate teams spread across multiple Saudi sites. Get in touch and we’ll work out what makes sense for your situation.
How does OSHA relate to TVTC or NEBOSH?
They do different things. TVTC is the Saudi authority that accredits our training centre — it’s not a qualification itself. NEBOSH is a UK professional credential. OSHA is a US-originated framework that’s become the global site-safety standard. Most Saudi safety professionals we work with hold OSHA alongside IOSH Managing Safely or NEBOSH. See our NEBOSH vs IOSH vs OSHA guide if you want to figure out which combination makes sense for you.
How much does OSHA training cost in Saudi Arabia?
Depends on the course level, how many people you’re training, and whether it’s at our centre or on-site. We have competitive rates for groups, and our cost guide gives you a starting point. For anything corporate, it’s worth getting in touch directly.
OSHA Training in Saudi Arabia — What the Market Now Expects
The Saudi industrial market has moved. Saudi Aramco contractors, NEOM project teams, and EPC firms working across the Kingdom now expect OSHA cards as a standard part of the HSE prequalification package. Organisations that don’t have them lose ground on tenders they should be winning.
We’ve been running OSHA Outreach Training in Saudi Arabia since 2015 — 10-hour and 30-hour programs, construction and general industry, delivered in Arabic and English at centres in Riyadh, Jeddah, Dammam, and Jubail. The programs sit alongside our H2S awareness training and permit-to-work training — if your team needs multiple certifications, we can handle them in a single engagement.
Reach out to PITC KSA when you’re ready to schedule training, get a group quote, or work out a delivery plan for your organisation anywhere in the Kingdom.
Ready to Get Your Team OSHA Certified in Saudi Arabia?
1,350 safety professionals have trained with PITC KSA. Our centres are in Riyadh, Jeddah, Dammam, and Jubail — or we come to you. Tell us what you need.